Kreg DB210 Foreman Pocket-Hole Machine User Manual download pdf (Page 13)

Two pocket holes with our recommended

⁄16" center-to center spacing

t entirely on the face of

⁄4"-thick boards at least 2

⁄8" wide. Simply set

up the machine for

⁄4"-thick stock. Then with the mitered end of the

workpiece against the fence, drill one hole

⁄16" from the miter heel and

a second hole 2

⁄16" from the miter toe.

You also can drill one pocket hole on each side of a miter joint rather

than drilling both holes on the same side.

Mitered corners

⁄2"

⁄16"

10.

Maintenance

To ensure product safety and reliability, all motor repairs should be performed by the Kreg Tool Company factory service center.

Call Kreg Customer Service (800.447.8638) for return authorization and shipping instructions.

Motor service

For a diagram and list of replacement parts and assemblies, go to www.kregtool.com and view the online version of this manual.

Replacement parts

1. Test Pieces

Test the joint with scrap pieces cut from the same stock as

your nal workpiece.

2. Make sure you’re using Kreg Screws

Kreg screws feature sharp, self-tapping tips that slice through

the wood bers instead of forcing them apart.

3. Use the Right Screw Type

Use ne-thread screws in hardwood. These #7 screws

displace less wood than the #8 coarse-thread screws used

for softwood, plywood, MDF, and particleboard.

4. Screw it In, Back it Out

Drive the screw half-way in, back it out to clear excess wood

bers from the hole, and then drive the screw all the way in.

5. Reduce Friction

Apply bee’s wax or other lubricant to the screw to reduce the

friction as the screw enters the workpiece.

6. Clamp Correctly

Center the pads of your Kreg Face Clamp™ on the

joint line with the large clamp pad on the face opposite

the pocket holes. Adjust the clamp to apply enough

pressure to keep the workpieces ush and stable but not

so tight to make clamping difcult.

6 Tips to reduce splitting

Tips

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 43 44

Comments to this Manuals

No comments

Kreg DB210 Foreman Pocket-Hole Machine User Manual Page 13

Comments to this Manuals

Related products and manuals for Tools Kreg DB210 Foreman Pocket-Hole Machine